• 1 306-436-2178
  • Office@GarrattIndustries.com
  • Milestone, Saskatchewan

Garratt Industries Grain & Seed Cleaning Equipment

Norstar Industries Grain Handling
Bucket Elevators

Norstar commercial Bucket Elevators are built to perform even in the harshest conditions. We utilize heavy-gauge steel in our trunking, boot and head sections to ensure structural integrity.

Norstar Bucket Elevators provide you with many options, they include, finish (Powder Coat, Galvanized and Stainless Steel), Variations of Distributors, Platforms, Support Towers, Catwalks, Staircases, and multiple types of Buckets.
Nortstar head

Norstar Bucket Elevators have the capacity to achieve from 100-60,000 bushels per hour and a maximum of 200 feet tall. Contact us for more specifications.

Features and Benefits of Norstar Bucket Elevators

Simple and Quick Installation 

Norstar commercial Bucket Elevators can be erected quickly (a leg over 100′ tall can often be lifted in one single crane lift), saving you time and money.

High Capacity 

Norstar commercial Bucket Elevators are capable of moving products at capacities up to 60,000 BPH with single, double or triple wide bucket configurations depending on the specific requirements.

Built Strong

Our commercial trunking is built with heavy-gauge steel and all of our trunking seams are track welded instead of spot welded. This makes the trunking less susceptible to warp or damage and provides a much more weather-tight trunk.

Square Install

Each of our elevators is shipped with heavy-duty connector plates that are installed between trunking sections to provide rigidity and ensure a square installation.

Scofr Rubber Belting

We use Goodyear SCOFR (static conductive, oil resistant & fire retardant) rubber belting instead of plastic/poly belts because it is more adaptive and flexible in a wide range of climates.

Easy to Clean

Norstar’s Winged Boot Pulley prevents material buildup on the pulley face. All of our models feature Clean-Out Doors that easily slide open to access the elevator boot floor for cleaning.

Heavy Duty

Norstar Bucket Elevator drives are fitted with heavy-duty bearings and heavy-duty shafts. They also feature a heavy-duty shaft-mounted Dodge gearbox.

EZ-Flow Slow Dump Bucket Elevators

Norstar EZ-FLOW™ Bucket Elevators are designed specifically for the seed industry. A special chain and bucket design allows the seed to be conveyed vertically and slowly dumped at the desired discharge point, eliminating unnecessary impact on the seed.

Norstar En-Masse Chain Conveyors


Norstar Commercial En-Masse Chain Conveyors provide you with high capacity conveyance when moving almost any free-flowing material. With a 10 Gauge conveyor housing the En-Masse Chain Conveyor is durable.

The En-Masse Chain Conveyance system maximizes your efficiency with minimal horsepower requirements.

Norstar En-Masse Chain Conveyors are completely closed and self cleaning providing you the best contamination protection in the industry.

Norstar En-Masse Chain Conveyors are available in three finishes, Power Coat, Galvanized, and Stainless Steel.
Avena - 0622 - Marvin - 28

The Norstar En-Masse Chain Conveyor has a maximum length of 150 feet and a top capacity of 60,000 bushels per hour. Contact us for more specifications.

Features and Benefits of Norstar En-Masse Chain Conveyors

Low Horsepower Requirements

The En-Masse works in such a way that the paddles drag along the conveyor floor, pushing the material at the bottom of the conveyor. The bottom layer of material that is moving carries all of the material lying on top of it along as well. This creates less torque which requires less horsepower.

Self Cleaning

All Norstar Drag Conveyors feature a curved back plate in the conveyor’s tail section that prevents material build up. The plate is attached to the tensioning system and moves along with adjustments to maintain close proximity to the conveyor paddles.

Minimized Maintenance Costs

UHMW paddles are gentle on the conveyor housing producing less wear. Maintaining/repairing the chain is as simple as adding or removing chain links compared to splicing belts or replacing auger flighting.

Maximized Fill Rate

Norstar En-Masse Drag Chain Conveyors feature a fully-enclosed housing with an open interior that promotes a higher fill rate than other forms of conveyance.

Quiet Operation and Minimal Wear

UHMW paddles are gentle on the conveyor housing and eliminate steel-on-steel contact. We use UHMW return rollers to ensure low impact chain support that minimizes noise and chain wear.

 

Protects Your Products Quality

Our elongated discharge allows material to exit the conveyor prior to the sprocket, eliminating crush/pinch points.

Norstar Incline Chain Conveyors


Norstar Commercial Incline Chain Conveyors provide you with high capacity conveyance when moving almost any free-flowing material. With a 10 Gauge conveyor housing the Incline Chain Conveyor is durable.

Norstar Incline Chain Conveyors are completely closed and self cleaning providing you the best contamination protection in the industry.

Norstar Incline Chain Conveyors are available in three finishes, Power Coat, Galvanized, and Stainless Steel.

To go with the Norstar Incline Chain Conveyors we also offer many options of drive over pits.
Avena - 0622 - Marvin - 8

The Norstar Incline Chain Conveyor has a maximum length of 150 feet and a top capacity of 40,000 bushels per hour. Contact us for more specifications.

Features and Benefits of Norstar Incline Chain Conveyors

Self Cleaning 

All Norstar Drag Conveyors feature a curved back plate in the conveyor’s tail section that prevents material build up. The plate is attached to the tensioning system and moves along with adjustments to maintain close proximity to the conveyor paddles.The two-chamber divider plate is slotted to ensure that material slides through to the discharge and is not left in the return chamber.

Maintaining Capacity at a Steep Incline

Norstar Incline Drag Chain Conveyors have a two-chamber design that sees the discharge and return chambers divided by a steel plate. Larger UHMW paddles ensure that material can be moved at a steep incline within these chambers with minimal fall back.

Minimized Maintenance Costs

UHMW paddles are gentle on the conveyor housing producing less wear. Maintaining/repairing the chain is as simple as adding or removing chain links compared to splicing belts or replacing auger flighting. 

Steep Handling 

Our Incline Drag Conveyors can be equipped with elbow sections ranging from 15° to 45° in incline, allowing you to move your material where it needs to go.

Quiet Operation and Minimal Wear

UHMW paddles are gentle on the conveyor housing and eliminate steel-on-steel contact. We use UHMW return rollers to ensure low impact chain support that minimizes noise and chain wear.

 

Protects Your Products Quality

Our elongated discharge allows material to exit the conveyor prior to the sprocket, eliminating crush/pinch points.

Norstar Screw Conveyors

Norstar Screw Conveyors are able to convey almost any bulk material. Each screw conveyor is custom configured to its application.

Norstar Screw Conveyors provide you with many options to meet your operations needs such as Thickened-Edge Auger Flighting.

Norstar Incline Chain Conveyors are available in three finishes, Power Coat, Galvanized, and Stainless Steel.
Norstar Screw 1

The Norstar Screw Conveyors have a wide range of capacity depending on size and speed. You have the option of conveyor style from Standard, Tubed, and U-Trough. Contact us for more specifications.

Features and Benefits of Norstar Screw Conveyors

Versatile Conveyance

Screw Conveyors can be used in multiple configurations to move a wide range of free-flowing materials including grain, fertilizer, sand, wood, powder, aggregate and even liquids. Multiple configurations available for overhead, under-bin, metering and other screw conveyance.

Built to C.E.M.A Standards

We offer a full line of screw conveyors designed and built according to the Conveying Equipment Manufacturers Association (C.E.M.A.) standards. This allows our equipment to match industry standard design specifications for your operation.

Longer Lasting Auger Flighting 

Our auger flighting has a thicker outer edge that allows you to move 100 BPH more than traditional flighting. It also increases the auger’s lifespan by over 30%.

Smooth Operation 

Norstar uses Split-Wood Hanger Bearings that allow for smooth rotation of the auger flighting, minimizing wear and noise (other bearing options available).

Built for You

We specify our conveyors according to product density and desired capacity so that your conveyance system runs at optimal performance. You also have the choice of Belt, Chain or Direct Drive.

Many Mounting Configurations

Adjustable Bin and Eave stands as well as Bin Rings are available for overhead applications. Mounting solutions for under-bin or side-structure applications are also available.

Screw Conveyor options include: Inclines, Reversible, Mixing and Blending, Metering Augers, Flat Slide Gates, Manual, Electric or Hydraulic Gate Opening Systems, Inlets, Liners, Mounting Kits, Support Towers, Monitoring Switches, Automation Kits, Standard or Sectional Flighting, Auger Pitch Options and Cut or Cut and Folded Flighting.

KC Garratt

Owner/Ceo/Sales
Sales Territory
Saskatchewan/Rest of the world

KC has been involved in seed cleaning his whole life and has designed, built and repaired Garratt Equipment and his knowledge is second to none. KC was recently awarded his 30 year Saskatchewan Seed Growers Association Award.

Contao

Alex Hiebert

Sales
Sales Territory
From the Saskatchewan and Manitoba border to the east and south

Alex joined our team in 2020. Alex previously worked for Norstar Commercial Grain Handling Systems. Prior to Norstar Alex manufactured fire trucks.

 

 

Contao

Brodie Garratt

Sales
Sales Territory
Alberta

Brodie like KC has been involved in seed cleaning his whole life and has previously worked in the manufacturing shop and has spent time repairing equipment within facilities.

 

 

Contao